Jiangsu Shizong Steel Co., LTD
430 Stainless Steel Coil
$0.00
Unit price perWe specialize in the supply of a full range of 430 stainless steel coils and support customized processing services, accurately matching application requirements based on corrosion resistance, magnetic properties, and fabrication needs.
By Manufacturing Process:
Cold rolled 430 stainless steel coil, Hot rolled 430 stainless steel coil
By Surface Treatment Type:
430 Mirror Stainless Steel Coil (8K), 430 Brushed Stainless Steel Coil (Long / Short Grain), 430 Embossed Stainless Steel Coil, 430 Sandblasted Stainless Steel Coil
Specifications
| Item | Specification |
|---|---|
| Product Type | 430 Stainless Steel Coil |
| Manufacturing Process | Cold Rolled (CR), Hot Rolled (HR) |
| Thickness Range | Thin gauge to medium thickness |
| Width | Standard mill width or custom slitting |
| Inner Diameter | 508 mm / 610 mm (or customized) |
| Coil Weight | As per mill standard or customer requirement |
| Surface Finish | 2B, BA, No.4, Polished |
| Edge Condition | Mill edge, slit edge |
| Supply Condition | Annealed and pickled |
| Processing Service | Slitting, cutting-to-length, leveling |
Chemical Composition (Typical)
| Grade | C (%) | Si (%) | Mn (%) | P (%) | S (%) | Cr (%) | Ni (%) |
|---|---|---|---|---|---|---|---|
| 430 | ≤ 0.12 | ≤ 1.00 | ≤ 1.00 | ≤ 0.040 | ≤ 0.030 | 16.0 – 18.0 | ≤ 0.75 |
Mechanical Properties (Typical)
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HB) |
|---|---|---|---|---|
| 430 | ≥ 450 | ≥ 205 | ≥ 22 | ≤ 183 |
Heat Treatment of 430 Stainless Steel Coil
1. Annealing
Temperature range: 760–815°C
Process: Heating followed by air cooling
Purpose: Relieves cold working stress and improves ductility
2. Stress Relieving
Applied after cold rolling or forming
Helps improve dimensional stability
3. Hardening
430 stainless steel coil cannot be hardened by heat treatment
Mechanical properties depend on composition and forming process
4. Performance Stability
Proper annealing stabilizes the ferritic structure and improves consistency during forming and fabrication.
Features of 430 Stainless Steel Coil
Corrosion Resistance:
Good resistance to atmospheric corrosion and mild chemical environments.
Magnetic Property:
Magnetic in all conditions due to ferritic structure.
Formability:
Good formability for bending and general forming operations.
Surface Quality:
Uniform surface suitable for decorative and appliance applications.
Cost Advantage:
Lower alloy content provides a cost-effective alternative to austenitic grades.
Applications of 430 Stainless Steel Coil
Household Appliances:
refrigerators, ovens, dishwashers, appliance panels; recommended: BA or 2B finish.
Decorative Applications:
interior panels, trims, elevator panels; recommended: brushed or polished coils.
Automotive Components:
exhaust trims, heat shields; recommended: cold rolled coils.
General Fabrication:
formed parts where moderate corrosion resistance is sufficient.
Indoor Construction:
architectural details and non-structural components.
FAQ – 430 Stainless Steel Coil
Q1: What is the main difference between 430 and 304 stainless steel coil?
430 is a ferritic stainless steel with lower corrosion resistance and magnetic properties, while 304 is austenitic and non-magnetic.
Q2: Is 430 stainless steel coil suitable for outdoor use?
It is suitable for indoor or low-corrosion environments. For outdoor exposure, protective measures or higher grades are recommended.
Q3: Can 430 stainless steel coil be welded?
Yes, but post-weld heat treatment may be applied to improve weld zone performance.
Q4: Is 430 stainless steel coil magnetic?
Yes. It is magnetic in both annealed and cold-worked conditions.
430 Stainless Steel Coil
✓ Standard：AISI, ASTM, GB, JIS, SUS
✓ Delivery Time：Within 7 working days
✓ Free sample
In stock
We specialize in the supply of a full range of 430 stainless steel coils and support customized processing services, accurately matching application requirements based on corrosion resistance, magnetic properties, and fabrication needs.
By Manufacturing Process:
Cold rolled 430 stainless steel coil, Hot rolled 430 stainless steel coil
By Surface Treatment Type:
430 Mirror Stainless Steel Coil (8K), 430 Brushed Stainless Steel Coil (Long / Short Grain), 430 Embossed Stainless Steel Coil, 430 Sandblasted Stainless Steel Coil
Specifications
| Item | Specification |
|---|---|
| Product Type | 430 Stainless Steel Coil |
| Manufacturing Process | Cold Rolled (CR), Hot Rolled (HR) |
| Thickness Range | Thin gauge to medium thickness |
| Width | Standard mill width or custom slitting |
| Inner Diameter | 508 mm / 610 mm (or customized) |
| Coil Weight | As per mill standard or customer requirement |
| Surface Finish | 2B, BA, No.4, Polished |
| Edge Condition | Mill edge, slit edge |
| Supply Condition | Annealed and pickled |
| Processing Service | Slitting, cutting-to-length, leveling |
Chemical Composition (Typical)
| Grade | C (%) | Si (%) | Mn (%) | P (%) | S (%) | Cr (%) | Ni (%) |
|---|---|---|---|---|---|---|---|
| 430 | ≤ 0.12 | ≤ 1.00 | ≤ 1.00 | ≤ 0.040 | ≤ 0.030 | 16.0 – 18.0 | ≤ 0.75 |
Mechanical Properties (Typical)
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation (%) | Hardness (HB) |
|---|---|---|---|---|
| 430 | ≥ 450 | ≥ 205 | ≥ 22 | ≤ 183 |
Heat Treatment of 430 Stainless Steel Coil
1. Annealing
Temperature range: 760–815°C
Process: Heating followed by air cooling
Purpose: Relieves cold working stress and improves ductility
2. Stress Relieving
Applied after cold rolling or forming
Helps improve dimensional stability
3. Hardening
430 stainless steel coil cannot be hardened by heat treatment
Mechanical properties depend on composition and forming process
4. Performance Stability
Proper annealing stabilizes the ferritic structure and improves consistency during forming and fabrication.
Features of 430 Stainless Steel Coil
Corrosion Resistance:
Good resistance to atmospheric corrosion and mild chemical environments.
Magnetic Property:
Magnetic in all conditions due to ferritic structure.
Formability:
Good formability for bending and general forming operations.
Surface Quality:
Uniform surface suitable for decorative and appliance applications.
Cost Advantage:
Lower alloy content provides a cost-effective alternative to austenitic grades.
Applications of 430 Stainless Steel Coil
Household Appliances:
refrigerators, ovens, dishwashers, appliance panels; recommended: BA or 2B finish.
Decorative Applications:
interior panels, trims, elevator panels; recommended: brushed or polished coils.
Automotive Components:
exhaust trims, heat shields; recommended: cold rolled coils.
General Fabrication:
formed parts where moderate corrosion resistance is sufficient.
Indoor Construction:
architectural details and non-structural components.
FAQ – 430 Stainless Steel Coil
Q1: What is the main difference between 430 and 304 stainless steel coil?
430 is a ferritic stainless steel with lower corrosion resistance and magnetic properties, while 304 is austenitic and non-magnetic.
Q2: Is 430 stainless steel coil suitable for outdoor use?
It is suitable for indoor or low-corrosion environments. For outdoor exposure, protective measures or higher grades are recommended.
Q3: Can 430 stainless steel coil be welded?
Yes, but post-weld heat treatment may be applied to improve weld zone performance.
Q4: Is 430 stainless steel coil magnetic?
Yes. It is magnetic in both annealed and cold-worked conditions.
1. Standard Export Packaging
All stainless steel sheets, plates, pipes, coils, and bars are packed according to export standards to ensure safety during handling and transportation.
Sheets & Plates: Covered with PVC protective film or waterproof paper, then fixed on fumigated wooden pallets or packed in wooden cases .
Coils: Secured with steel strips and supported by steel frames to prevent deformation.
Pipes & Bars: Bundled with steel straps or packed in wooden boxes based on length and diameter.
2. Surface & Damage Protection
Packaging focuses on protecting the material surface and structural integrity.
Moisture-resistant wrapping to reduce the risk of corrosion
Edge and corner protection for sheets and plates
Firm strapping to avoid movement during container loading and unloading
This helps minimize scratches, bending, and other damage during long-distance transportation.
3. Container & Long-Distance Transportation
All packaging is suitable for container shipping and international logistics.
Stable pallet stacking for container loading
Secure fixing to prevent shifting during sea transportation
Suitable for sea, land, and multimodal transport
Products are packed to remain stable during extended transit and storage.
4. Customized Packaging Options
Packaging can be adjusted based on customer requirements.
Customized pallet sizes or reinforced packaging
Special labeling or marking for easy identification
Mixed loading arrangements for different products
Packaging details can be confirmed before shipment, and photos are available upon request.
| English Name | China GB/T | Japan JIS | USA AISI/UNS | Europe EN/DIN |
|---|---|---|---|---|
| Austenitic Stainless Steel 201 | 0Cr17Mn6Ni5N | SUS201 | AISI 201 / UNS S20100 | EN 1.4372 |
| Austenitic Stainless Steel 202 | 0Cr18Mn9Ni6N | SUS202 | AISI 202 / UNS S20200 | EN 1.4122 |
| Austenitic Stainless Steel 301 | 06Cr17Ni7 | SUS301 | AISI 301 / UNS S30100 | EN 1.4310 |
| Austenitic Stainless Steel 303 | 0Cr17Ni13Mo | SUS303 | AISI 303 / UNS S30300 | EN 1.4305 |
| Austenitic Stainless Steel 304 | 0Cr18Ni9 | SUS304 | AISI 304 / UNS S30400 | EN 1.4301 |
| Austenitic Stainless Steel 304L | 06Cr19Ni10 | SUS304L | AISI 304L / UNS S30403 | EN 1.4307 |
| Austenitic Stainless Steel 305 | 0Cr17Ni14Cu2 | SUS305 | AISI 305 / UNS S30500 | EN 1.4303 |
| Austenitic Stainless Steel 309S | 00Cr23Ni13 | SUS309S | AISI 309S / UNS S30908 | EN 1.4828 |
| Austenitic Stainless Steel 310S | 0Cr25Ni20 | SUS310S | AISI 310S / UNS S31008 | EN 1.4845 |
| Austenitic Stainless Steel 316 | 0Cr17Ni12Mo2 | SUS316 | AISI 316 / UNS S31600 | EN 1.4401 |
| Austenitic Stainless Steel 316L | 00Cr17Ni12Mo2 | SUS316L | AISI 316L / UNS S31603 | EN 1.4404 |
| Austenitic Stainless Steel 316Ti | 00Cr17Ni12Mo2Ti | SUS316Ti | AISI 316Ti / UNS S31635 | EN 1.4571 |
| Austenitic Stainless Steel 317 | 00Cr19Ni13Mo3 | SUS317 | AISI 317 / UNS S31700 | EN 1.4438 |
| Austenitic Stainless Steel 321 | 00Cr19Ni10Ti | SUS321 | AISI 321 / UNS S32100 | EN 1.4541 |
| Austenitic Stainless Steel 347 | 0Cr19Ni12Mo2Ti | SUS347 | AISI 347 / UNS S34700 | EN 1.4550 |
| Austenitic Stainless Steel 904L | ZG0Cr19Ni25Mo4Cu2 | SUS904L | AISI 904L / UNS N08904 | EN 1.4539 |
| Austenitic Stainless Steel 254SMO | ZG17Cr20Ni14Mo3Cu | SUS312L1 | AISI 254SMO / UNS S31254 | EN 1.4547 |
| Ferritic Stainless Steel 409 | 0Cr11Mo | SUS409 | AISI 409 / UNS S40900 | EN 1.4512 |
| Martensitic Stainless Steel 410 | 1Cr13 | SUS410 | AISI 410 / UNS S41000 | EN 1.4006 |
| Martensitic Stainless Steel 420 | 0Cr17Ni4Cu4Nb | SUS420 | AISI 420 / UNS S42000 | EN 1.4021 |
| Ferritic Stainless Steel 430 | 0Cr17 | SUS430 | AISI 430 / UNS S43000 | EN 1.4016 |
| Ferritic Stainless Steel 439 | 0Cr18Mn11Nb | SUS439 | AISI 439 / UNS S43900 | EN 1.4517 |
| Ferritic Stainless Steel 444 | 0Cr18Mn13Si | SUS444 | AISI 444 / UNS S44400 | EN 1.4521 |
| Ferritic Stainless Steel 446 | 0Cr25Mo4N | SUS446 | AISI 446 / UNS S44600 | EN 1.4762 |
| Martensitic Stainless Steel 416 | 0Cr13MoS4 | SUS416 | AISI 416 / UNS S41600 | EN 1.4005 |
| Duplex Stainless Steel 2205 | ZG2CrNiMo | SUS329J4L | UNS S32205 | EN 1.4462 |
| Duplex Stainless Steel 2304 | ZG0Cr23Ni5MoN | SUS329J1L | UNS S32304 | EN 1.4362 |
| Precipitation Hardening Stainless 17-4PH | ZG0Cr17Ni4Cu4Nb | SUS630 | UNS S17400 | EN 1.4542 |
| Martensitic Stainless Steel 431 | ZG1Cr17Ni2Mo | SUS431 | AISI 431 / UNS S43100 | EN 1.4057 |
Recommended Products
Get in touch
- Choosing a selection results in a full page refresh.
- Opens in a new window.