201 Stainless Steel Sheet / Plate

We supply a full range of 201 stainless steel sheets and plates with flexible customization and reliable quality. Available in various sizes, thicknesses, finishes, and processing options to meet both decorative and industrial needs.

Our 201 stainless steel sheets (typically ≤6 mm) and plates (>6 mm) come in a wide range of thicknesses, sizes, and surface finishes to suit decorative, architectural, structural, and general fabrication requirements.

Available in thicknesses from 0.3mm to 30mm， and in common sizes such as 4×8 ft (1219 × 2438 mm) ；5×10 ft (1500 × 3000 mm) ；Custom Cut-to-Size: Available upon request

By Manufacturing Process:
Cold Rolled 201 Stainless Steel Sheet / Plate, Hot Rolled 201 Stainless Steel Plate

By Surface Treatment Type:
201 Mirror Stainless Steel Sheet (8K), 201 Brushed Stainless Steel Sheet (Long Grain / Short Grain), 201 Embossed Stainless Steel Sheet, 201 Sandblasted Stainless Steel Sheet

201 Stainless Steel Sheets/Plates

201 stainless steel is an austenitic stainless steel grade featuring a balanced blend of chromium (about 16–18%), manganese (5–8%), and reduced nickel (3.5–5.5%). Compared with higher-nickel grades like 304/316, 201 offers excellent cost efficiency while maintaining good corrosion resistance and strength, making it ideal for applications that do not demand extreme chemical resistance.

Chemical Composition of 201 Stainless Steel (wt%)

Mechanical Properties of 201 Stainless Steel Sheet / Plate

Heat Treatment of 201 Stainless Steel

201 stainless steel is an austenitic stainless steel and cannot be hardened by heat treatment. Heat treatment is mainly used to restore ductility, improve corrosion resistance, and relieve internal stress after cold working or welding.

Common Heat Treatment Methods:

1、Solution Annealing
Heating to 1010–1120°C, followed by rapid cooling (water quenching) to achieve a uniform austenitic structure/

2、Stress Relief Annealing
Used after heavy cold forming or welding to reduce residual stress and improve dimensional stability.

⚠️ Note: Excessive heat exposure or improper cooling may reduce corrosion resistance due to carbide precipitation.

Features of 201 Stainless Steel Plates 

1、Cost-Effective Austenitic Stainless Steel
Lower nickel content makes 201 stainless steel sheet a budget-friendly alternative to 304 stainless steel.

2、Good Strength & Formability
Higher manganese content improves tensile strength while maintaining acceptable ductility for bending and forming.

3、Moderate Corrosion Resistance
Suitable for indoor, dry, or mildly corrosive environments. Not recommended for marine or high-chloride conditions.

4、Good Weldability
Compatible with TIG, MIG, and arc welding. Proper post-weld treatment is recommended for corrosion-sensitive applications.

5、Decorative Surface Performance
Performs well in mirror, brushed, embossed, and sandblasted finishes for architectural and decorative uses.

Typical Applications

201 stainless steel sheet and plate are widely used for:

Kitchen & Food Equipment: Counters, sinks, range hoods, work surfaces (0.8 – 1.5 mm)

Interior Decoration: Wall panels, elevator doors, ceiling panels

Furniture & Appliances: Refrigerator panels, cabinet doors, table frames

Automotive & Transportation: Trim strips, inner panels, luggage racks

Architecture & Construction: Handrails, decorative cladding, light structural parts

Commercial Displays & Fixtures: Sign boards, shop fittings, aesthetic trims

201 Stainless Steel Sheet & Plate – FAQs

Q1: What is 201 stainless steel sheet?

201 stainless steel sheet is a low-nickel, austenitic stainless steel sheet containing higher manganese, offering good strength and cost efficiency for general and decorative applications.

Q2: Is 201 stainless steel better than 304?

201 stainless steel is more cost-effective than 304, but it has lower corrosion resistance. 304 stainless steel is preferred for harsher or corrosive environments.

Q3: What are common applications of 201 stainless steel sheets?

201 stainless steel sheets are commonly used in interior decoration, kitchen equipment, furniture, appliances, architectural panels, and general fabrication.

Q4: Can 201 stainless steel be used outdoors?

201 stainless steel can be used outdoors in mild environments but is not recommended for coastal, marine, or high-chloride conditions.

Q5: Is 201 stainless steel food grade?

201 stainless steel is generally used for non-critical food contact or auxiliary equipment. For strict food-grade applications, 304 or 316 stainless steel is recommended.

Q6: Can 201 stainless steel sheet be welded?

Yes, 201 stainless steel sheet can be welded using TIG, MIG, or arc welding. Proper welding procedures help maintain performance and corrosion resistance.

Q7: What thicknesses are available for 201 stainless steel plate?

201 stainless steel sheets and plates are available in thicknesses from 0.3 mm to 30 mm, with custom cut-to-size options available.

Q8: What surface finishes are available for 201 stainless steel sheet?

Common finishes include mirror (8K), brushed (long or short grain), embossed, sandblasted, BA, and 2B finishes.

Q9: Is 201 stainless steel magnetic?

201 stainless steel is generally non-magnetic in the annealed condition but may become slightly magnetic after cold working.

Q10: What is the difference between cold rolled and hot rolled 201 stainless steel?

Cold rolled 201 stainless steel has a smoother surface and tighter tolerances, while hot rolled 201 stainless steel plate is typically used for thicker and structural applications.

Q11: Can 201 stainless steel rust?

201 stainless steel has moderate corrosion resistance. In humid or chloride-rich environments, surface corrosion may occur if not properly maintained.

Q12: Do you provide custom sizes and processing for 201 stainless steel sheets?

Yes, custom sizes, cutting, polishing, bending, and other processing services are available based on project requirements.